Home
Installation
Leak Indicator
Contact
Search
View Cart
Products

15mm and 20mm Meters
15mm to 50mm Multijet
15 to 50mm Arad
15 to 500mm Hot Water
20mm Meter
50mm Arad WMR
50mm to 500mm Cold
80 to 300mm IRT
Batching Meter Kit
Digital Displays
Digital Meters
Flange Gaskets
Measurement Logging
Meter Filters
Pressure Reducing Valve
Saddle Meters

www.watermeters.com.au

Current Category
15 to 50mm Arad


Multi-Jet meters rated to 10 Bar, manufactured in Israel and suitable for clean water to 50 degrees C.   All meters supplied with male brass BSP union set.




15mm Arad Multi-Jet Cold Water Meter with 1 pulse per 1 litre Output

15mm Arad Multi-Jet Cold Water Meter with 1 pulse per 1 litre Output

Our 15mm meter with 1 pulse per 1 litre output Arad Multi-Jet meters are manufactured in Israel and are rated to a maximum operating pressure of 10 Bar / 1,000 kPa.   Supplied with a set of brass male BSP unions and reed switch type pulse output.   15mm meter with 1 pulse per 1 litre output.   Our 10 Bar rated meters will operate perfectly for many many years when installed with a "Y" strainer in the inlet side of the water system.   If there is any chance of water hammer occuring in the system, we strongly recommend that a good quality drip tight pressure reducing/regulating valve be installed upstream of the water meter.  These meters must be installed in a horizontal plane and are suitable for cold water to a maximum of 50 degrees C.   Click on the "information" button to the right for additional images and specifications sheet download link in pdf format.

Price:







QTY:

        
20mm Arad Multi-Jet Cold Water Meter with 1 pulse per 1 litre Output

20mm Arad Multi-Jet Cold Water Meter with 1 pulse per 1 litre Output

Our 20mm meter with 1 pulse per 1 litre output Arad Multi-Jet meters are manufactured in Israel and are rated to a maximum operating pressure of 10 Bar / 1,000 kPa.   Supplied with a set of brass male BSP unions and reed switch type pulse output.   20mm meter with 1 pulse per 1 litre output.   Our 10 Bar rated meters will operate perfectly for many many years when installed with a "Y" strainer in the inlet side of the water system.   If there is any chance of water hammer occuring in the system, we strongly recommend that a good quality drip tight pressure reducing/regulating valve be installed upstream of the water meter.  These meters must be installed in a horizontal plane and are suitable for cold water to a maximum of 50 degrees C.   Click on the "information" button to the right for additional images and specifications sheet download link in pdf format.

Price:







QTY:

        
25mm Arad Multi-Jet Cold Water Meter with 1 pulse per 1 litre Output

25mm Arad Multi-Jet Cold Water Meter with 1 pulse per 1 litre Output

Our 25mm meter with 1 pulse per 1 litre output Arad Multi-Jet meters are manufactured in Israel and are rated to a maximum operating pressure of 10 Bar / 1,000 kPa.   Supplied with a set of brass male BSP unions and reed switch type pulse output.   25mm meter with 1 pulse per 1 litre output.   Our 10 Bar rated meters will operate perfectly for many many years when installed with a "Y" strainer in the inlet side of the water system.   If there is any chance of water hammer occuring in the system, we strongly recommend that a good quality drip tight pressure reducing/regulating valve be installed upstream of the water meter.  These meters must be installed in a horizontal plane and are suitable for cold water to a maximum of 50 degrees C.   Click on the "information" button to the right for additional images and specifications sheet download link in pdf format.

Price:







QTY:

        
32mm Arad Multi-Jet Cold Water Meter with 1 pulse per 1 litre Output

32mm Arad Multi-Jet Cold Water Meter with 1 pulse per 1 litre Output

Our 32mm meter with 1 pulse per 1 litre output Arad Multi-Jet meters are manufactured in Israel and are rated to a maximum operating pressure of 10 Bar / 1,000 kPa.   Supplied with a set of brass male BSP unions and reed switch type pulse output.   32mm meter with 1 pulse per 1 litre output.   Our 10 Bar rated meters will operate perfectly for many many years when installed with a "Y" strainer in the inlet side of the water system.   If there is any chance of water hammer occuring in the system, we strongly recommend that a good quality drip tight pressure reducing/regulating valve be installed upstream of the water meter.  These meters must be installed in a horizontal plane and are suitable for cold water to a maximum of 50 degrees C.   Click on the "information" button to the right for additional images and specifications sheet download link in pdf format.

Price:







QTY:

        
40mm Arad Multi-Jet Cold Water Meter with 1 pulse per 10 litre Output

40mm Arad Multi-Jet Cold Water Meter with 1 pulse per 10 litre Output

Our 40mm meter with 1 pulse per 10 litre output Arad Multi-Jet meters are manufactured in Israel and are rated to a maximum operating pressure of 10 Bar / 1,000 kPa.   Supplied with a set of brass male BSP unions and reed switch type pulse output.   40mm meter with 1 pulse per 10 litre output.   Our 10 Bar rated meters will operate perfectly for many many years when installed with a "Y" strainer in the inlet side of the water system.   If there is any chance of water hammer occuring in the system, we strongly recommend that a good quality drip tight pressure reducing/regulating valve be installed upstream of the water meter.  These meters must be installed in a horizontal plane and are suitable for cold water to a maximum of 50 degrees C.   Click on the "information" button to the right for additional images and specifications sheet download link in pdf format.

Price:







QTY:

        
50mm Arad Multi-Jet Cold Water Meter with 1 pulse per 10 litre Output

50mm Arad Multi-Jet Cold Water Meter with 1 pulse per 10 litre Output

Our 50mm meter with 1 pulse per 10 litre output Arad Multi-Jet meters are manufactured in Israel and are rated to a maximum operating pressure of 10 Bar / 1,000 kPa.   Supplied with a set of brass male BSP unions and reed switch type pulse output.   50mm meter with 1 pulse per 10 litre output.   Our 10 Bar rated meters will operate perfectly for many many years when installed with a "Y" strainer in the inlet side of the water system.   If there is any chance of water hammer occuring in the system, we strongly recommend that a good quality drip tight pressure reducing/regulating valve be installed upstream of the water meter.  These meters must be installed in a horizontal plane and are suitable for cold water to a maximum of 50 degrees C.   Click on the "information" button to the right for additional images and specifications sheet download link in pdf format.

Price:







QTY:

        

 


Secure ecommerce shopping cart software
and credit card processing provided by ezimerchant

Online Store Software