Water Meters

The range of Single-Jet water meters is manufactured in Italy and has an impressive degree of accuracy with an error of less than 0.75% in the normal operating range.   Each meter is individually checked and the flow is tested to ensure that every meter complies with ISO 4064 and many other strict European Standards.

•  
  • All brass body,
  • The dial can rotate 360 degrees for easy reading,
  • Pressure rated to 16 Bar (160m, 228 psi),
  • Hot water to 90 Degrees C,
  • 8 reading rolls show cubic meters (1,000L) and,
  • The last three red numbers show litres,
  • The single red hand on the lower dial rotates once per litre,
  • Central star revolves with the smallest leak in the system,
  • Brass male BSP unions supplied to each end for easy installation,
  • Minimum flow is 50 L/Hour, Nominal flow is 2,500 L/Hour,
  • Maximum flow is 5,000 L/Hour.

Installation:

• Install your Single-Jet "BMeter" in the horizontal plane with 10 x the diameter of straight pipe before the meter and 5 x the diameter of straight pipe after the meter.
• Water must be clean and free of particles above 500 microns (0.5mm),
• A filter with a 500 micron stainless steel screen is recommended for all installations and should be installed at any location prior to the straight length of pipe entering the meter.

Applications:

• Metering the flow in domestic appliances,
• Metering the flow in commercial applications such as air conditioning,
• Metering the flow in industrial applications,
• Metering the flow from pumps,
• Rural applications such as horse stables, chicken farms, piggeries etc,
• Technical projects where accurate flow is required.

To download the specifications sheet in pdf format - click here.

 Brass "Y" strainer is recommended for all installations.